Name: QNAP TS-130
Brand: QNAP
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Reset Button

Operation User Action Result

Basic system reset Press and hold the button for 3 seconds. The following settings are reset to default:

• System administrator password: The

default password is the first MAC

address in uppercase letters without

special characters. For example, if

the first MAC address is 00-08-9B-

F6-15-75, then the admin password

will be 00089BF61575.

Tip

You can find the first MAC

address using Qfinder Pro. A

label attached to the device

also lists the address as MAC1.

• TCP/IP configuration:

• Obtain IP address settings

automatically via DHCP

• Disable jumbo frames

• If port trunking is enabled (multi-

LAN models only), the port

trunking mode is reset to “Active

Backup (Failover)”.

• System port: 8080 (system service

port)

• Security level: Low (Allow all

connections)

• LCD panel password: (blank)

• VLAN: Disabled

Advanced system

reset

Press and hold the button for 15 seconds. The default factory settings are restored.

To retrieve old data after an advanced

system reset, recreate the previous folder

structure on the NAS.

LEDs

LEDs indicate the system status and related information when the device is powered on. The following LED

information applies only when the drive is correctly installed and when the device is connected to the

network or to a host.

For details on the location of the LEDs, see Components.

TS-130 User Guide

Basic Operations 23

Questions and Answers:

Need help?

Do you have a question about the QNAP TS-130 and is the answer not in the manual?

QNAP TS-130 Specifications

General

RAID support	-
Hot-swap drive bays	Yes
Storage drive capacity	0 GB
Supported file systems	FAT32, HFS+, NTFS, ext3, ext4
Storage drive interface	Serial ATA II, Serial ATA III
Storage drives installed	No
Storage drive sizes supported	2.5, 3.5 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	1
Processor cores	4
Processor model	RTD1295
Processor frequency	1.4 GHz
Processor manufacturer	Realtek
Flash memory	4000 MB
Internal memory	1 GB
Internal memory type	DDR4
Ethernet LAN data rates	1000 Mbit/s
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Chassis type	Tower
Cooling type	Active
Fan diameter	50 mm
Product color	White
LED indicators	HDD, LAN, Status, System
Number of fans	1 fan(s)
Type	NAS
Noise level	15.2 dB
Device class	Home & Home Office
Operating system version	5.0.0
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Server operating systems supported	Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supported	Windows 10, Windows 7, Windows 8
Fan voltage	12 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power supply location	External
Power consumption (typical)	7.29 W
Power consumption (HDD standby)	- W
Power supply unit (PSU) capacity	36 W
Cables included	AC, LAN (RJ-45)
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Harmonized System (HS) code	84714100