QNAP TS-1283XU-RP Repair Manual

9. Remove the air shroud from the fan tray.
10. Remove the CPU fans from the fan tray.
a. Remove the screws that secure the fans to the fan tray.
Note
• The at head M4.5x10 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category D NAS Models 102

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English