QNAP TS-1283XU-RP Repair Manual

Note
• The at head #6-32 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
d. Attach the system fan cables to the system board.
14. Attach the CPU fans to the fan tray.
a. Pass the fan cables through the holes in the fan tray.
b. Align the holes on the fans to the screw holes in the fan tray.
| NAS Repair Manual
Category D NAS Models 129

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English