QNAP TS-1283XU-RP Repair Manual

b. Attach the screws that secure the backplane to the backplane tray.
Note
• The at head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
2. Install the backplane tray.
a. Insert the backplane tray into the chassis.
| NAS Repair Manual
Category E NAS Models 157

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English