QNAP TS-1283XU-RP Repair Manual

c. Connect the PSU cables to the system board and backplane.
d. Attach the screws that secure the power supply cage to the bottom of the chassis.
Note
• The at head M3x4 screws require a Phillips #2 screwdriver.
• A torque of 5 kgf.cm (4.34 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
6. Install fans onto the fan tray.
a. Align the fans to the screw holes on the fan tray.
| NAS Repair Manual
Category E NAS Models 163

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English