QNAP TS-1283XU-RP Repair Manual

b. Remove the system board.
17. Remove the front panel from the base chassis.
a. Remove the screws that secure the bottom of the front cover to the bottom of the chassis.
Note
• The at head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 3 kgf.cm (2.60 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
| NAS Repair Manual
Category C NAS Models 74

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English