QNAP TS-1283XU-RP Repair Manual

5. Attach the system board to the system board tray.
a. Align the mounting holes on the system board with the screw holes on the tray.
b. Attach the screws.
Note
• The at head M3x5 screws require a Phillips #2 screwdriver.
• A torque of 7 kgf.cm (6.08 lbf.in) ± 0.5 kgf.cm (0.43 lbf.in) is recommended for
electric screwdrivers.
6. Attach the system board tray.
| NAS Repair Manual
Category C NAS Models 81

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English