QNAP TS-1283XU-RP Repair Manual

11. Attach the power supply unit.
a. Align the screw holes of the power supply unit to the screw holes of the chassis.
b. Attach the screws that secure the power supply unit to the chassis.
Note
• The at head M3x4 screws on the rear chassis require a Philips #2 screwdriver.
• The at head M3x4 screws on the base chassis require a Philips #2 screwdriver.
| NAS Repair Manual
Category C NAS Models 88

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English