QNAP TS-1283XU-RP User Manual

c. Lift the top cover up.
5. Remove an existing module.
a. Push the retention clips outward simultaneously to release the module.
Warning
Attempting to remove a module that is not completely released may damage the module and
the motherboard.
b. Hold the module by the edges and then carefully slide it out of the slot.
6. Install a new module.
a. Align the notch with the ridge in the slot.
b. Insert the module into the slot.
TS-x83XU User Guide
Installation and Configuration 32

QNAP TS-1283XU-RP Specifications

General

Brand	QNAP
Model	TS-1283XU-RP
Category	Network Hardware
Language	English