EasyManuals Logo

QNAP TS-210 User Manual

QNAP TS-210
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
The NA
S supports hot-swapping the hard drives when 1 member drive crashes in RAID 1,
1–2 member drives crash in RAID 5 or RAID 6. Follow the steps below to hot-swap the
hard drive when a member drive fails in a RAID configuration.
1. Login the NAS and check the disk volume configuration in “Volume Management”.
2. The volume status should be “in degraded mode”.
3. Prepare a new hard drive to replace the failed one. The capacity of the new hard drive
should be the same as or larger than the failed hard drive.
4. Unplug the failed drive from the NAS. Wait for about 20 seconds or until the server
beeps twice.
5. Remove the failed drive from the drive tray.
6. Install the new hard drive on the drive tray. Insert it to the NAS.
7. The server should beep 1.5 seconds twice.
8. Check the volume status on the web administration page. The volume should be
rebuilding.
Warning: Users are strongly recommended to turn OFF the server before replacing
the hard drive to reduce the risk of electric shock.
40

Other manuals for QNAP TS-210

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-210 and is the answer not in the manual?

QNAP TS-210 Specifications

General IconGeneral
Storage drive size3.5 \
Storage drive capacity0 GB
Storage drive interfaceSerial ATA, Serial ATA II
Total installed storage capacity0 TB
Number of storage drives installed0
Number of storage drives supported2
Flash memory16 MB
Internal memory0.25 GB
Internal memory typeDDR2
Processor model6281
Processor familyMarvell
Processor frequency0.8 GHz
Number of processors installed1
USB 2.0 ports quantity3
Power supply unit (PSU) capacity60 W
External power adapterYes
Fan6cm
Dimensions (WxDxH)85 x 218.4 x 165.5 mm
Power requirements100-240V
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 95 %
LED indicatorsFan fail, HDD, LAN, Power, Status, Y
Number of fans1 fan(s)
Cabling technology10/100/1000BASE-T(X)
Maximum data transfer rate1000 Mbit/s
Number of users2048 user(s)
Security algorithmsHTTPS, SSH, SSL/TLS
Weight and Dimensions IconWeight and Dimensions
Weight910 g

Related product manuals