QNAP TS-210 User Manual

For example, whe
n 5 hard drives installed are available on the NAS, the LCD panel shows:
C o n f i g . D i s k s ?
→ R A I D 5
Press the “Select” button to browse more options, for example, RAID 6.
Press the “Enter” button and the following message shows. Press the “Select” button to
select “Yes” to confirm.
C h o o s e R A I D 5 ?
→ Y e s N o
When RAID 1, RAID 5, or RAID 6 configuration is executed, the system will initialize the
hard drives, create the RAID device, format the RAID device, and mount it as a volume on
the NAS. The progress will be shown on the LCD panel. When it reaches 100%, the RAID
volume can be accessed. Users can create share folders and upload files to the folders on
the NAS. In the meantime, to make sure the stripes and blocks in all the RAID component
devices are ready, the NAS will execute RAID synchronization and the progress will be
shown on “Disk Management” > “Volume Management” page. The synchronization rate is
around 30–60 MB/s (vary by hard drive models, system resource usage, etc.).
Note: If a member drive of the RAID configuration was lost during the synchronization, the
RAID device will enter degraded mode. The volume data is still accessible. If a new
member drive is added, the NAS will start to rebuild. The status can be checked on the
“Volume Management” page.
44

QNAP TS-210 Specifications

General

Storage drive size	3.5 \
Storage drive capacity	0 GB
Storage drive interface	Serial ATA, Serial ATA II
Total installed storage capacity	0 TB
Number of storage drives installed	0
Number of storage drives supported	2
Flash memory	16 MB
Internal memory	0.25 GB
Internal memory type	DDR2
Processor model	6281
Processor family	Marvell
Processor frequency	0.8 GHz
Number of processors installed	1
USB 2.0 ports quantity	3
Power supply unit (PSU) capacity	60 W
External power adapter	Yes
Fan	6cm
Dimensions (WxDxH)	85 x 218.4 x 165.5 mm
Power requirements	100-240V
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	0 - 95 %
LED indicators	Fan fail, HDD, LAN, Power, Status, Y
Number of fans	1 fan(s)
Cabling technology	10/100/1000BASE-T(X)
Maximum data transfer rate	1000 Mbit/s
Number of users	2048 user(s)
Security algorithms	HTTPS, SSH, SSL/TLS

Weight and Dimensions

Weight	910 g