QNAP TS-412 User Manual

4. R
emove the case cover of the NAS gently.
5. Lift up the Mylar sheet. Locate the memory slot. Make sure the slot is empty.
6. Grasp the edge of the memory module. Align the notch on the gold edge of the
module with the notch in the memory slot. Slide the memory module to the slot at a
45-degree angle (approximately).
7. Gently press the memory module into the slot until it is seated fully.
25

QNAP TS-412 Specifications

General

RAID levels	0, 1, 5, 6, 10
Storage drive size	2.5/3.5 \
Storage drive capacity	- GB
Supported file systems	ext3, ext4, FAT32, HFS+, NTFS
Storage drive interface	Serial ATA, Serial ATA II
Total installed storage capacity	- TB
Maximum supported storage capacity	8 TB
Number of storage drives installed	-
Number of storage drives supported	4
Flash memory	16 MB
Internal memory	0.25 GB
Internal memory type	DDR2
Processor model	6281
Processor family	Marvell
Processor frequency	1.2 GHz
Number of processors installed	1
Fan	90 mm
Dimensions (WxDxH)	180 x 235 x 177 mm
Power requirements	100-240V
Networking features	Gigabit Ethernet
Compatible operating systems	Windows 2000; Windows XP; Windows Vista (32/ 64 bit); Windows Windows 7 (32/ 64 bit); Windows Server 2003/2008; Mac OS X; Linux & Unix.
DHCP client	Yes
Maximum data transfer rate	1000 Mbit/s
Supported network protocols	TCP/IP
Security algorithms	HTTPS, SSH, SSL/TLS
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports	2
Chassis type	Tower
LED indicators	HDD, LAN, Power, Y
Number of fans	1 fan(s)
Power consumption (sleep)	11 W
Power consumption (typical)	26 W
Power supply unit (PSU) capacity	120 W
Operating temperature (T-T)	0 - 40 °C

Weight and Dimensions

Weight	3000 g