EasyManuals Logo

QNAP TS-412 User Manual

QNAP TS-412
71 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
Enable warning aler
t for redundant power supply on the web-based interface:
If two power supply units (PSU) have been installed on the NAS and connected to the power
sockets, both PSU will supply the power to the NAS (applied to 1U and 2U models). Users
can enable redundant power supply mode in “System Administration” > “Hardware” to
receive warning alert for the redundant power supply. The NAS will beep and record the
error messages in “System Logs” when the PSU is plugged out or fails.
If only one PSU is installed on the NAS, users are suggested NOT to enable this option.
* This function is disabled by default.
56

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-412 and is the answer not in the manual?

QNAP TS-412 Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10
Storage drive size2.5/3.5 \
Storage drive capacity- GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA, Serial ATA II
Total installed storage capacity- TB
Maximum supported storage capacity8 TB
Number of storage drives installed-
Number of storage drives supported4
Flash memory16 MB
Internal memory0.25 GB
Internal memory typeDDR2
Processor model6281
Processor familyMarvell
Processor frequency1.2 GHz
Number of processors installed1
Fan90 mm
Dimensions (WxDxH)180 x 235 x 177 mm
Power requirements100-240V
Networking featuresGigabit Ethernet
Compatible operating systemsWindows 2000; Windows XP; Windows Vista (32/ 64 bit); Windows Windows 7 (32/ 64 bit); Windows Server 2003/2008; Mac OS X; Linux & Unix.
DHCP clientYes
Maximum data transfer rate1000 Mbit/s
Supported network protocolsTCP/IP
Security algorithmsHTTPS, SSH, SSL/TLS
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Ethernet LAN (RJ-45) ports2
Chassis typeTower
LED indicatorsHDD, LAN, Power, Y
Number of fans1 fan(s)
Power consumption (sleep)11 W
Power consumption (typical)26 W
Power supply unit (PSU) capacity120 W
Operating temperature (T-T)0 - 40 °C
Weight and Dimensions IconWeight and Dimensions
Weight3000 g

Related product manuals