EasyManuals Logo

QNAP TS-453U User Manual

QNAP TS-453U
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #76 background imageLoading...
Page #76 background image
76
4. Plug in a new power supply to the NAS.
5. Turn on the NAS.
Enable warning alert for redundant power supply on the web-based interface:
If two power supply units (PSU) have been installed on the NAS and connected to the power
sockets, both PSU will supply the power to the NAS (applied to 1U and 2U models). Users
can enable redundant power supply mode in “System Administration” > “Hardware” to
receive warning alert for the redundant power supply. The NAS will beep and record the
error messages in “System Logs” when the PSU is plugged out or fails.
If only one PSU is installed on the NAS, users are suggested NOT to enable this option.

Other manuals for QNAP TS-453U

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-453U and is the answer not in the manual?

QNAP TS-453U Specifications

General IconGeneral
RAID levels1, 5, 6, 10
RAID supportYes
Storage drive size2.5/3.5 \
Storage drive capacity0 GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA III
Storage drives installedNo
Supported storage drive typesHDD & SSD
Total installed storage capacity0 TB
Number of storage drives installed0
Number of storage drives supported4
Processor model-
Processor familyIntel® Celeron®
Processor frequency2 GHz
Flash memory512 MB
Memory slots2
Internal memory4 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocolsCIFS/SMB, AFP (v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
USB 2.0 ports quantity1
Chassis typeRack (1U)
Cooling typeActive
Fan diameter40 mm
Product colorBlack
TypeNAS
Device classSmall & Medium Business
Backup featuresCloud, iSCSI LUN
Security algorithms256-bit AES, FIPS 140-2, HTTPS, SSH, SSL/TLS
Operating system version4.1
Operating system installedQNAP Turbo System
Fan voltage12 V
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power supply locationBuilt-in
Power consumption (sleep)23.54 W
Power consumption (typical)39.86 W
Power supply unit (PSU) capacity250 W
Cables includedAC, LAN (RJ-45)
Weight and Dimensions IconWeight and Dimensions
Depth499 mm
Width439 mm
Height44 mm

Related product manuals