QNAP TS-464 User Manual

11. Click Next.
The Set the date and time screen appears.
12. Specify the time zone, date, and time using any of the following methods:
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
Methods User Actions
Synchronize with computer or device time Select Same as the computer/device time
The NAS time will be the same as your computer or
device used to congure the time.
Enter manually a. Select Input Manually.
b. Specify the date and time.
The NAS date and time will be the same as the
congured time.
Synchronize with an Internet time server
automatically
Click Synchronize with an Internet time server
automatically.
The NAS time will be the same as the NTP server.
13. Click Next.
The Congure the network settings screen appears.
14. Congure the network settings using any of the following methods.
Methods User Actions
Obtain an IP address automatically (DHCP) Select Obtain an IP address automatically (DHCP)
The system automatically detects and congures the
IP address settings.
Use static IP address a. Select Use static IP address.
The IP address conguration page appears.
b. Specify the following IP address congurations:
• Interface
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS server
• Secondary DNS server
15. Click Next.
The Thunderbolt Connection page appears.
Note
This page only appears if your device supports Thunderbolt. You will need to connect your
device to a computer using a Thunderbolt cable.
16. Click Next.
TS-x62, TS-x64 User Guide
Installation and Conguration 52

QNAP TS-464 Specifications

General

Processor cores	4
Processor model	N5095
Processor family	Intel® Celeron®
Processor frequency	- GHz
Processor manufacturer	Intel
Processor boost frequency	2.9 GHz
On-board graphics card model	Intel® UHD Graphics
Number of processors supported	1
Flash memory	4096 MB
Memory slots	2
Internal memory	8 GB
Memory form factor	SO-DIMM
Internal memory type	DDR4
Maximum RAM supported	16 GB
USB port	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Fan voltage	12 V
AC input voltage	100 - 240 V
Power supply location	Built-in
Power consumption (sleep)	21.618 W
Power consumption (typical)	40.536 W
Power supply unit (PSU) capacity	90 W
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	5 - 95 %
Ethernet LAN data rates	10, 100, 1000, 2500 Mbit/s
RAID levels	0, 1, 5, 6, 10, JBOD
Storage drive capacity	0 GB
Storage drive interface	-
Storage drives installed	No
Storage drive sizes supported	2.5, 3.5, M.2 \
Supported storage drive types	HDD & SSD
Total installed storage capacity	0 TB
Number of storage drives installed	0
Supported storage drive interfaces	Serial ATA III
Operating system version	5.0.1
Operating system installed	QNAP QTS
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 11.0 Big Sur, Mac OS X 12.0 Monterey
Server operating systems supported	Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019
Windows operating systems supported	Windows 10, Windows 11, Windows 7, Windows 8
Chassis type	Tower
Cooling type	Active
Fan diameter	120 mm
Product color	Black
Number of fans	1 fan(s)
Cable lock slot type	Kensington
Type	NAS
Device class	Small & Medium Business
Backup features	Cloud, iSCSI LUN
Browser supported	Apple Safari, Google Chrome, Microsoft Edge, Mozilla Firefox
Cables included	AC, LAN (RJ-45)
Number of screws	24

Weight and Dimensions

Depth	226 mm
Width	170 mm
Height	168 mm
Weight	2260 g
Package weight	3600 g