D
Dale RogersAug 12, 2025
How to hot-swap failed drives on a QNAP Server?
- RRobert HernandezAug 13, 2025
To hot-swap failed drives on your QNAP Server, follow these steps: 1. Log on to QuTS hero. 2. Go to Main Menu > Storage & Snapshots > Storage > Disks/VJBOD. 3. Locate the failed drive. 4. Prepare a new hard drive with the same or larger capacity. 5. Remove the failed drive from the device and wait for 20 seconds or until the device beeps twice. 6. Remove the failed drive from the drive tray, insert the new drive into the drive tray, and install the new drive.