Need help?Do you have a question about the QNAP TVS-472XT and is the answer not in the manual?
General| Flash memory | 5000 MB |
|---|---|
| Memory slots | 2 |
| Internal memory | 4 GB |
| Memory form factor | SO-DIMM |
| Internal memory type | DDR4 |
| Maximum RAM supported | 64 GB |
| RAID levels | 0, 1, 5, 6, 10, JBOD |
| RAID support | Yes |
| Storage drive capacity | 0 GB |
| Supported file systems | FAT32, HFS+, NTFS, exFAT, ext3, ext4 |
| Storage drive interface | - |
| Storage drives installed | No |
| Storage drive sizes supported | 2.5, 3.5, M.2 \ |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 4 |
| Supported storage drive interfaces | M.2, Serial ATA II, Serial ATA III |
| Processor family | Intel® Pentium® |
| Processor frequency | - GHz |
| Processor manufacturer | Intel |
| On-board graphics card model | Intel® UHD Graphics 610 |
| Concurrent connections | 700 |
| Ethernet LAN (RJ-45) ports | 3 |
| PCI Express x4 (Gen 3.x) slots | 1 |
| Ethernet LAN data rates | 100, 1000, 2500, 5000, 10000 Mbit/s |
| Supported network protocols | TCP/IP, IPv4, IPv6 |
| Ethernet LAN data rate supported (max) | 10000 Mbit/s |
| Chassis type | Tower |
| Cooling type | Active |
| Display type | LCD |
| Fan diameter | 120 mm |
| Product color | Black |
| Fan diameter 2 | 60 mm |
| LED indicators | HDD, LAN, Status, USB |
| Number of fans | 3 fan(s) |
| Cable lock slot type | Kensington |
| Type | NAS |
| Noise level | 21.2 dB |
| Device class | Home & Home Office |
| Share folder | CIFS/SMB |
| Backup features | iSCSI LUN |
| Browser supported | Apple Safari, Google Chrome, Microsoft Internet Explorer, Mozilla Firefox |
| Security algorithms | 256-bit AES, HTTPS, SSH, SSL/TLS |
| Fan voltage | 12 V |
| AC input voltage | 100 - 240 V |
| Power consumption (typical) | 37.32 W |
| Power consumption (HDD standby) | 24.14 W |
| Power supply unit (PSU) capacity | 250 W |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Cables included | AC, LAN (RJ-45) |
| Number of screws | 24 |
| Operating system version | 5.0.0 |
| Operating system installed | QNAP QTS |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave, Mac OS X 10.15 Catalina, Mac OS X 10.15.3 Catalina, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks, Mac OS X 11.0 Big Sur |
| Linux operating systems supported | CentOS 7.0, SuSE Linux 12.0, SuSE Linux 12.3, SuSE Linux 15, Ubuntu 14.04, Ubuntu 14.10, Ubuntu 15.04, Ubuntu 15.10, Ubuntu 16.04, Ubuntu 16.10, Ubuntu 17.10, Ubuntu 18.04 LTS, Ubuntu 20.04 LTS |
| Other operating systems supported | IBM AIX 7.1, IBM AIX 7.2, Solaris 10, Solaris 11 |
| Server operating systems supported | Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016, Windows Server 2019 |
| Windows operating systems supported | Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 10 x64, Windows 11, Windows 11 x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
| On-board graphics card ID | 0x3E90/x93 |
| On-board graphics card OpenGL version | 4.5 |
| On-board graphics card base frequency | 350 MHz |
| On-board graphics card DirectX version | 12.0 |
| On-board graphics card dynamic frequency (max) | 1050 MHz |
| Harmonized System (HS) code | 84714100 |
Weight and Dimensions| Depth | 279.6 mm |
|---|---|
| Width | 199.3 mm |
| Height | 188.2 mm |
| Weight | 5400 g |
| Package weight | 7010 g |
Provides information on the QNAP TVS-x72XT NAS, installation, basic operations, and troubleshooting.
Intended for consumers and storage administrators with basic storage and backup knowledge.
Explains symbols used in the guide (notes, warnings, tips) and their meanings.
Overview of the TVS-x72XT NAS features, including Intel processor, memory, ports, and Thunderbolt 3.
Details the hardware specifications of the TVS-x72XT models, including processor, memory, storage, and ports.
Safety guidelines for device storage, handling by qualified personnel, and ESD procedures.
Safety precautions for power connection, PSU handling, and battery replacement.
Covers installing drives, expansion cards, and memory modules.
Instructions for installing 3.5-inch drives on the NAS.
Instructions for installing 2.5-inch drives on the NAS 3.5-inch trays.
Steps for installing M.2 SSDs, including safety warnings and heatsink recommendations.
Information on installing expansion cards, requiring compatible brackets.
Specific steps for installing expansion cards on the TVS-472XT model.
Specific steps for installing expansion cards on TVS-672XT and TVS-872XT models.
Instructions for upgrading memory modules, including safety warnings.
Overview of methods for installing the QNAP QTS operating system.
Detailed steps for installing QTS using the Qfinder Pro utility.
Instructions for installing QTS via the Cloud Key method.
Steps for installing QTS using an HDMI display and keyboard/remote.
Describes NAS power button functions: power on, power off, and force power off.
Details basic and advanced system reset operations and their effects.
Explains the functionality of the USB One Touch Copy button for data backups.
Overview of operations that can be performed using the NAS LCD panel.
How to configure IP address, subnet mask, gateway, and DNS settings via LCD.
How to view drive temperature and capacity using the LCD panel.
How to view volume name and capacity using the LCD panel.
How to view CPU temp, system temp, and fan speed via LCD.
Steps to power off the NAS using the LCD panel.
Steps to restart the NAS using the LCD panel.
How to set or change the password for the NAS LCD panel.
Lists system messages, statuses, and descriptions for troubleshooting.
Explains the meaning of different LED statuses for system, LAN, and drive indicators.
Describes audio alerts (beeps) for various NAS events like startup and errors.
Steps to troubleshoot issues where Qfinder Pro or myQNAPcloud cannot locate the NAS.
Instructions for replacing failed drives in the NAS without shutting it down.
Defines key terms used in the user guide, such as CloudKey, myQNAPcloud, and QTS.
Provides information on limited warranty, disclaimers, and product usage limitations.
Presents the terms and conditions of the GNU General Public License, Version 3.
FCC Class B notice stating compliance and conditions for operation.
States that the QNAP NAS complies with CE Compliance Class B.
Table showing hazardous substance content complying with China RoHS standards.
To Next Page
