QNAP TVS-73e Series - Installing 2.5-inch Hard Drives or Solid State Drives on 3.5-inch Trays

TVS-x73e User Guide
Installation and Configuration 17
• Installing a drive deletes all data on the drive.
• Observe electrostatic discharge (ESD) procedures to avoid damage to components.
1. Power off the NAS.
2. Remove the drive tray.
a. Slide the lock down.
b. Pull the handle to release the tray.
c. Pull the tray out.
3. Install a drive on the drive tray.
a. Remove the right fastening panel from the tray.