QNAP TVS-73e Series - Installing Memory Modules

Installing Memory Modules
The NAS has four memory slots. You can increase the memory capacity of the NAS by adding or upgrading
memory modules. When using multiple modules, use only QNAP modules of the same type and capacity to
maintain system performance and stability. You can pur
resellers.
When installing modules, ensure the following:
1. A module is installed in slot 1.
2.
Modules are installed in pairs. When installing two modules, use slots 1 and
For details on slot numbering, see
Right Panel
Warning
•
Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or
•
Observe electrostatic discharge (ESD) procedures to avoid damage to
1. Power off the NAS.
2.
Disconnect the power cord from the electrical
3.
Disconnect all cables and external
4. Remove the case cover.
a.
Remove the screws that secure the cover to the
b. Slide the cover back.
c.
Pull the cover up until it completely detaches from the
5. Remove an existing memory
module.
Installation and Configuration
The NAS has four memory slots. You can increase the memory capacity of the NAS by adding or upgrading
memory modules. When using multiple modules, use only QNAP modules of the same type and capacity to
maintain system performance and stability. You can purchase QNAP memory modules from authorized
When installing modules, ensure the following:
Modules are installed in pairs. When installing two modules, use slots 1 and
3.
Right Panel
.
Only qualified personnel should perform the following steps. Failure to follow
instructions can result in serious injury or
death.
Observe electrostatic discharge (ESD) procedures to avoid damage to
Disconnect the power cord from the electrical
outlet.
Disconnect all cables and external
attachments.
Remove the screws that secure the cover to the
chassis.
Pull the cover up until it completely detaches from the
chassis.
module.
TVS-x73e User Guide
Installation and Configuration
27
The NAS has four memory slots. You can increase the memory capacity of the NAS by adding or upgrading
memory modules. When using multiple modules, use only QNAP modules of the same type and capacity to
chase QNAP memory modules from authorized
Only qualified personnel should perform the following steps. Failure to follow
Observe electrostatic discharge (ESD) procedures to avoid damage to
components.