a.
Push the retention clips outward simultaneously to release the
b.
Hold the module by the edges and then carefully slide it out of the
Warning
Attempting to remove a module that is not completely released may damage the module and
the motherboard.
6.
Install a new memory module.
a.
Align the notch with the ridge
b.
Insert the module into the
c.
Verify that the metal connectors are completely inserted into the
Installation and Configuration
Push the retention clips outward simultaneously to release the
module.
Hold the module by the edges and then carefully slide it out of the
slot.
Attempting to remove a module that is not completely released may damage the module and
Align the notch with the ridge
in the slot.
Insert the module into the
slot.
Verify that the metal connectors are completely inserted into the
slot.
TVS-x73e User Guide
Installation and Configuration
28
Attempting to remove a module that is not completely released may damage the module and
To Next Page
Loading...
