QNAP TVS-73e Series User Manual

7. Specify the following
information.
• NAS name
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (
• Password
: Specify an administrator password with 1 to 64 characters. The password supports all
ASCII characters.
8. Click Next.
9.
Specify the time zone, date, and
Tip
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
10. Click Next.
11. Select
Obtain an IP address automatically
12. Click Next.
13.
Select the types of devices that you will use to access shared folders on the
14. Click Next.
15. Select Configure disks later.
Note
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
16. Configure the disk settings.
a. Select a volume type.
b.
Select the disks that you want to use to create a RAID
c. Optional: Select a RAID
type.
Note
The
Smart Installation Guide
number of the selected disks.
d. Optional: Select
Encrypted Disk
17. Click Next.
18. Select No.
Note
•
Enabling the multimedia functions allows you to install multimedia applications after
configuring the disks in Storage
•
For details on enabling multimedia functions on QTS, see the System Administration
section of the QTS User
19. Click Next.
20. Review the settings.
Installation and Configuration
information.
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
numbers (0 to 9), and hyphens (
-), but cannot end with a hyphen.
: Specify an administrator password with 1 to 64 characters. The password supports all
Specify the time zone, date, and
time.
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
Coordinated Universal Time (UTC) standard.
Obtain an IP address automatically
(DHCP).
Select the types of devices that you will use to access shared folders on the
NAS.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
Select the disks that you want to use to create a RAID
group.
type.
Smart Installation Guide automatically selects the optimal RAID type based on the
number of the selected disks.
Encrypted Disk
Volume and Bad Block Scan.
Enabling the multimedia functions allows you to install multimedia applications after
configuring the disks in Storage
Manager.
For details on enabling multimedia functions on QTS, see the System Administration
Guide.
TVS-x73e User Guide
Installation and Configuration
33
: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),
: Specify an administrator password with 1 to 64 characters. The password supports all
QNAP recommends connecting to an NTP server to ensure that the NAS follows the
NAS.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
automatically selects the optimal RAID type based on the
Enabling the multimedia functions allows you to install multimedia applications after
For details on enabling multimedia functions on QTS, see the System Administration

QNAP TVS-73e Series Specifications

General

Brand	QNAP
Model	TVS-73e Series
Category	Storage
Language	English