QOLSYS IQ PANEL User Guide

GETTING STARTED
Let’s start by connecting your power. (note: if your panel has been professionally installed, skip this page)
Plug in the power connector Route the wire behind the
retainer clip
Insert the wire into the strain-
relief
Now let’s put on your cover and attach the table stand.
Place the top of the cover onto
the panel’s back plate
Push the cover down until it
snaps in place
Insert the table stand into the
mounting holes and push upward
until it snaps into place
Plug in your panel, power it on
Plug in the power supply
provided with your panel
Push and hold the standby
button on the side of the panel
for 3 seconds
Once the panel powers up, the
home screen will appear.

QOLSYS IQ PANEL Specifications

General

Display	7-inch touchscreen
Resolution	1024 x 600
Communication	Wi-Fi, Cellular
Sensors	Built-in Accelerometer
Voice Control	Yes (Amazon Alexa, Google Assistant)
Z-Wave	Yes (Z-Wave Plus)
Bluetooth	Yes
Battery Backup	Rechargeable lithium-ion battery
Siren	85dB internal siren
Wireless Connectivity	Wi-Fi, Z-Wave, Bluetooth
Security	Encrypted Sensors, Tamper Detection