QSC TouchMix-8 - Security Setup

26
TD-000472-00-B
Right Side of the TouchMix-8
Mixing Surface
Refer to — Figure 14
1. ¼” TRS inputs (9/10 and 11/12) – Line
level, stereo.
2. Phantom +48V – Displays input channel
Phantom Power buttons.
3. Auxes – A shortcut to the Aux Mix screen.
4. Wizard – Links to wizards that assist with
various tasks.
5. Phones – Displays Phones level control, use
Master Control to adjust.
6. U2 – Factory default clears all clipping
indications.
7. U1 – Factory default selects the next control to
the left.
8. Master Control – Adjusts the selected
parameter, press & turn for fine adjustments.
9. Power (Standby) – Takes the mixer in and
out of Standby.
IMPORTANT: Before removing
power (unplugging) press the
Standby button to power-down the
mixer.
10. Info – Displays the menu of help topics.
11. FX Mute – Mutes all four FX outputs.
12. Mute Groups – Displays Mute Group controls and setup options.
13. U3 – Factory default clears all Cues.
14. U4 – Factory default selects the next control to the right.
15. Ø – Returns the selected control to its default position.
16. Link – Displays the Link status and Network Name if connected.
17. Scene – Displays the name of the current Scene.
18. Home – Navigates up the menu structure to the Home screen.
19. Menu – Displays a choice of menu options, including Mixer Setup.
20. Record/Play − Displays recording controls and options.
21. Nudge (+/-) – Increases or decreases the value setting of the currently selected parameter.
22. Control Mode – Changes the granularity of the Nudge control.
— Figure 14 —
Phantom Power
Stereo In
9/10
Stereo In
11/12
TouchMix-8
+
48V
User User
Press for f ine
Phones
FX
Mute
Aux
Mute
Groups
U4U1
U2 U3
0
Wizard Info
3
7
1
2
8
14
10
9
11
12
15
13
4
6
5
5
21
7
3
6
15
13
10
11
4
14
22
20
19
16
17
18
12