62
TD-000472-00-B
Mute Groups
Mute Groups allow you to mute a group of assigned channels, at the same time, by pressing the Mute Group mute button.
Press Mute
Groups
Mute
Groups
About Mute Groups
When a channel is in one or more Mute Groups, all Mute Groups containing the
same channel and the Channel Mute itself, must be unmuted for audio to pass.
Mute Groups Mute Screen
Refer to — Figure 64
1.
Edit Button
– Touch the Edit button to add or remove channels from
Mute Groups.
2.
Mute Group Buttons
– From the Mute Groups screen you can mute or unmute
any of the eight Mute Groups.
Mute Group Edit Screen
Refer to — Figure 65
1.
Close Edit Button
– Returns to the Mute Group Mute screen.
2.
Mute Group Select Buttons
– Selects the Mute Group for editing.
3.
Mute Buttons
– Mutes / unmutes the channels assigned to the Mute Group.
NOTE:
Channel Mute (on Home screen) – When a channel is muted
by a Mute Group only, the channel Mute button is a lighter shade of
red. (not gray)
4.
User-Defined Name
– Touch the name to display a keyboard that may be used
to enter a name for the Mute Group.
5.
Mute Group System Label
– This name does not change.
6.
Clear Button
– Clears all assignments from the selected Mute Group.
7.
Assignment Buttons
– Touch one of the channel Assignment buttons to
add the channel to the selected Mute Group. You can assign all channel types
except DCAs.
— Figure 64 —
1
2
— Figure 65 —
2
7
6
4
5
3
1
To Next Page
Loading...
