QSC TouchMix-8 - Output Channel - Presets; Presets Tab - Selects Presets Screen; Delete Button (User Only) - Select a User Preset and Touch this Button to Delete the Preset

42
TD-000472-00-B
Output Channel – Presets
Store, recall and copy the settings associated with an output channel.
Home Select the
Aux Bank
Touch a
Select Button
Select
Presets Tab
Presets
Aux Outputs
Aux 1 Main
or
Refer to — Figure 36
1. Presets Tab – Selects the Presets screen
2. Current Preset Label – Displays the name of the current active preset.
3. Save / Save As Buttons – Displays a page with options for naming a
preset and selecting internal or USB storage destination.
4. Internal Presets List – Up to 100 Internal Presets may be stored to and
recalled from Internal memory.
5. Factory Presets List – Displays a list of factory programmed presets.
Currently, the only preset available is Reset. Reset sets all output channel’s
parameters to their factory default state.
6. External Presets List – Up to 100 External Presets may be stored to and
recalled from an External (USB) storage device
7. Recall Preset Button – Recalls stored output channel EQ settings, limiter
settings, filter settings, mute assignments, DCA assignments, link state,
name and (optional) channel level.
8. Omit Levels Switch – When set to “Omit Levels”, recalling the preset will
not change any levels.
9. Copy to Internal Button – Copy the selected Preset to the Internal
Mixer storage.
10. Copy to USB Button – Copy the selected Preset to a connected USB drive.
11. Delete Button – Select a User Preset and touch this button to delete the Preset.
— Figure 36 —
7
8 9
1
2
3
4
5
6
10 11