+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
a. Create a standard IPv6 access-list based on nomenclature
ipv6 access-list standard <name>
no ipv6 access-list standard <name>
Creates a standard IP access-list based on
nomenclature; the no command delete the
name-based standard IPv6 access-list.
b. Specify multiple permit or deny rules
[no] {deny | permit}
{{<sIPv6Prefix/sPrefixlen>} | any-source |
{host-source <sIPv6Addr> }}
Creates a standard name-based IPv6 access
rule; the no form command deletes the
name-based standard IPv6 access rule.
c. Exit name-based standard IP ACL configuration mode
Exits name-based standard IPv6 ACL
configuration mode.
2. Configuring packet filtering function
(1) Enable global packet filtering function
Enables global packet filtering function.
Disables global packet filtering function.
3. Configuring time range function
(1) Create the name of the time range
time-range <time_range_name>
Create a time range named
time_range_name.
no time-range <time_range_name>
Stop the time range function named
time_range_name.
(2) Configure periodic time range
absolute-periodic {Monday | Tuesday | Wednesday |
Configure the time range for the
To Next Page
Loading...
Need help?
General
