QTech QSW-2800 series

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
315
3 Access-Reject
4 Accounting-Request
5 Accounting-Response
11 Access-Challenge
Identifier field (1 octet): Identifier for the request and answer packets.
Length field (2 octets): The length of the overall RADIUS packet, including Code, Identifier,
Length, Authenticator and Attributes
Authenticator field (16 octets): used for validation of the packets received from the RADIUS
server. Or it can be used to carry encrypted passwords. This field falls into two kinds: the
Request Authenticator and the Response Authenticator.
Attribute field: used to carry detailed information about AAA. An Attribute value is formed by
Type, Length, and Value fields.
Type field (1 octet), the type of the attribute value, which is shown as below:
Property
Type of property
Property
Type of property
1
User-Name
23
Framed-IPX-Network
2
User-Password
24
State
3
CHAP-Password
25
Class
4
NAS-IP-Address
26
Vendor-Specific
5
NAS-Port
27
Session-Timeout
6
Service-Type
28
Idle-Timeout
7
Framed-Protocol
29
Termination-Action
8
Framed-IP-Address
30
Called-Station-Id
9
Framed-IP-Netmask
31
Calling-Station-Id
10
Framed-Routing
32
NAS-Identifier
11
Filter-Id
33
Proxy-State
12
Framed-MTU
34
Login-LAT-Service
13
Framed-Compression
35
Login-LAT-Node
14
Login-IP-Host
36
Login-LAT-Group
15
Login-Service
37
Framed-AppleTalk-Link
16
Login-TCP-Port
38
Framed-AppleTalk-Network
17
(unassigned)
39
Framed-AppleTalk-Zone
18
Reply-Message
40-59
(reserved for accounting)
19
Callback-Number
60
CHAP-Challenge
20
Callback-Id
61
NAS-Port-Type