QTech QSW-2800 series

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
316
21
(unassigned)
62
Port-Limit
22
Framed-Route
63
Login-LAT-Port
Length field (1 octet), the length in octets of the attribute including Type, Length and Value
fields.
Value field, value of the attribute whose content and format is determined by the type and
length of the attribute.
43.2 RADIUS Configuration Task
List
1. Enable the authentication and accounting function
2. Configure the RADIUS authentication key
3. Configure the RADIUS server
4. Configure the parameter of the RADIUS service
5. Configure the IP address of the RADIUS NAS
1. Enable the authentication and accounting function
2. Configure the RADIUS authentication key
Command
Explanation
Global Mode
radius-server key <string>
no radius-server key
To configure the encryption key for the
RADIUS server. The no form of this command
will remove the configured key.
3. Configure the RADIUS server
Command
Explanation
Command
Explanation
Global Mode
aaa enable
no aaa enable
To enable the AAA authentication function.
The no form of this command will disable the
AAA authentication function.
aaa-accounting enable
no aaa-accounting enable
To enable AAA accounting. The no form of
this command will disable AAA accounting.
aaa-accounting update {enable|disable}
Enable or disable the update accounting
function.