QTech QSW-2800 series - Page 360

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
346
vacl mac access-group {<700-1199> | WORD}
{in | out} [traffic-statistic] vlan WORD
no vacl mac access-group {<700-1199> |
WORD} {in | out} vlan WORD
Configure or delete MAC VLAN-ACL.
(Egress filtering is not supported by switch.)
3. Configure VLAN-ACL of MAC-IP
Command
Explanation
Global mode
vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} [traffic-statistic] vlan WORD
no vacl mac-ip access-group {<3100-3299> |
WORD} {in | out} vlan WORD
Configure or delete MAC-IP VLAN-ACL.
(Egress filtering is not supported by switch.)
4. Configure VLAN-ACL of IPv6 type
Command
Explanation
Global mode
vacl ipv6 access-group (<500-699> | WORD)
{in | out} (traffic-statistic|) vlan WORD
no ipv6 access-group {<500-699> | WORD}
{in | out} vlan WORD
Configure or delete IPv6 VLAN-ACL.
(Egress filtering is not supported by switch.)
5. Show configuration and statistic information of VLAN-ACL
Command
Explanation
Admin mode
show vacl [in | out] vlan [<vlan-id>]
Show the configuration and the statistic
information of VACL. (Egress filtering is not
supported by switch.)
6. Clear statistic information of VLAN-ACL
Command
Explanation
Admin mode
clear vacl [in | out] statistic vlan [<vlan-id>]
Clear the statistic information of VACL.
(Egress filtering is not supported by switch.)