Quadra-Fire TREKKER INSERT series User Manual

7January 8, 2019 7082-154E
TREKKER INSERT
C. Quick Start Guide
March 19, 2018
QUICK START GUIDE
*Before you plug in this appliance, follow these instructions*
Operation
Set Up
Manual Feed
1. Empty
 re box of
component
packet and
any other
debris.
2. Add pellets
and close
lid.
65
OFF
8:30 AM
MANUAL FEED
ON
65
48
STANDBY
72
65
STANDBY
Set Temperature
8. From the home screen press the outer ring to access the set temperature; rotate
clockwise to raise the temperature and counterclockwise to lower the tempera-
ture.
Note: Refer to the Quadra-Fire Wireless User Interface manual for more infor-
mation.
3. Install user inter-
face per instruc-
tions.
4. Plug in the ap-
pliance
(exhaust
blower will run for
about 45 seconds,
wait for it to stop
before moving to
manual feed)
.
65
72
HEATING
5. From the OFF home screen press and hold the outer ring
for 3 seconds to access the main menu.
6. Rotate to MANUAL FEED from the main menu and press
outer ring to select.
7. Rotate to ON, then press outer ring to start.
• The screen will display FEEDING; either wait for MANUAL FEED to complete
or press OFF to cancel feeding.
• When MANUAL FEED completes the user interface will automatically set
POWER to ON and return to the home screen.
• Refer to Quadra-Fire Wireless User Interface manual for more information.
Note: The MANUAL FEED menu option is only available when your home
screen reads OFF.
Note: MANUAL FEED is required during initial set up of the unit, or after the
unit has alarmed out due to an empty hopper.

Quadra-Fire TREKKER INSERT series Specifications

General

Brand	Quadra-Fire
Model	TREKKER INSERT series
Category	Pellet stove
Language	English