EN - 40 -
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
CHAPTER 6.
Transportation and changing of installation position
• The original packages and foamed polystyrene (PS) can be retained if required.
• During transportation, the appliance should be secured with a wide string or a strong
rope. The instructions written on the corrugated box must be followed while transporting.
• Before transporting or changing the installation
position, all the moving objects (ie,shelves,crisper…)
should be taken out or xed with bands in order to
prevent them from getting damaged.
Carry your fridge in the upright position.
Repositioning the door
• It is not possible to change the opening direction of your refrigerator door, if the door
handle on your refrigerator is installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any handles.
• If the door opening direction of your refrigerator may be changed, you should contact
the nearest Authorised Service Agent to have the opening direction changed.
Dairy products Preparation
Maximum storage
time (months)
Storage conditions
Packet
(Homogenized) Milk
In its own packet 2 - 3
Pure Milk – in its own
packet
Cheese - excluding
white cheese
In slices 6 - 8
Original packaging may
be used for short-term
storage. Keep wrapped in
foil for longer periods.
Butter, margarine In its packaging 6
To Next Page
