General Cleaning and Servicing
Replacement Parts
Working Methods
• Do not spray water onto the shredder. Electric shock hazard.
• Always keep the shredder, wheels and air vents clean. Use a brush or cloth to clean it, avoid cleaners
and solvents.
• Always check that the shredder and especially the guards are not worn down or damaged but rmly
attached before use. Check that the nuts, bolts and screws are tight.
• Check the covers and guards for damage and improper attachment. If necessary, change the
components
• Keep the shredder in a dry place out of children’s reach. Do not cover the shredder in nylon bags, as
moisture may develop.
Only use original replacement poarts
To Next Page
Loading...