CAUTION! The following states how damage to the shredder and possible injury to people can be
avoided:
• Handle the unit with care. Clean the ventilation slots regularly, follow the maintenance instructions.
• Do not overload your device. Work only within the indicated range of performance. Do not use low
power machines for heavy duty work. Do not use your device for purposes for which it has not been
designed.
• Only switch the shredder o once the hopper funnel is completely empty since the shredder may
otherwise clog up and not be able to start afterwards.
• Do not attempt to repair the shredder yourself unless you are qualied to do so. Any work not
specied in this manual may only be carried out by a qualied service centre.
CAUTION! The following states how damage to the shredder and possible injury to people can be
avoided:
• Handle the unit with care. Clean the ventilation slots regularly, follow the maintenance instructions.
• Do not overload your device. Work only within the indicated range of performance. Do not use low
power machines for heavy duty work. Do not use your device for purposes for which it has not been
designed.
• Only switch the shredder o once the hopper funnel is completely empty since the shredder may
otherwise clog up and not be able to start afterwards.
• Do not attempt to repair the shredder yourself unless you are qualied to do so. Any work not
specied in this manual may only be carried out by our service centre.
• Only use extension cables that have been approved for outdoor use and are resistant to splash water.
The core diameter for extension cables measuring up to 25 m must be at least 1.5 mm², and 2.5 mm²
for cables longer than 25m. Always roll the whole cable o the reel before use. Check the cable for
damage.
• Do not unplug the shredder pulling on the cable, only pull the plug itself. Keep the cable away from
heat, oil and sharp edges.
Working with the Device (continued)
Electrical Safety
Preparation
To Next Page
Loading...