Specification Value
Silent shredder. SDS2810
Nominal power intake 2800W(S6 40% 50S)
Nominal voltage 220V-240V AC, 50 Hz
Safety class II
Degree of protection IP24
Branch thickness. Max 42 mm
Collection box content Approx 60 l
Weight 22 kg
Sound power level Measured (LWA) 96,3 dB(A); KwA = 2,4 dB(A)
Guaranteed 99 dB(A)
* The max. branch thickness that can be shredded is dependent on the type of wood and the quality of the
goods being cut.
For hard wood (e.g. oak/beech branches), the max. branch thickness that can be shredded is less than for soft
wood (e.g. pine/spruce wood). For dry or knotted wood, the cutting thickness may also be less.
The sound levels have been determined in accordance with noise measuring process EN 13683:2009-09,
appendix F.
The equipment is intend for use only in premises having a eliminate current capacity equal to or greater
than 100A per phase supplied from a distribution network having a nominal voltage of 230V. You may need
to check with your electricity provider if in ant doubt.
Noise and vibration values were determined according to the standards and stipulations mentioned in the
declaration of conformity.
Further technical or cosmetic changes may be carried out by the manufacturer without notice due to on-
going product improvement programs. References made in this manual may therefore sometimes vary.
Legal claims, which are made on the basis of the instruction manual, cannot thus be considered as valid.
Technical Data
Technical Data Table
Disposal and Recycling
Getting Help
Disposal
Do not dispose with household waste.
Recycle products and components according to local legal requirements.
After sales helpline number: 08456 400 800
Spare parts purchases: www.argosspares.co.uk
To Previous Page
Loading...