To Next PageTo Next Page
Need help?Do you have a question about the QualGear QG-PM-FT1-WHT and is the answer not in the manual?
General| Color | White |
|---|---|
| Material | Steel |
| Weight Capacity | 30 lbs |
| Mounting Pattern | Universal |
| Adjustable Tilt | Yes |
| Maximum Load Capacity | 30 lbs |
| VESA Compatible | Yes |
| Product Type | Wall Mount |
| VESA Hole Pattern | 200x100 mm, 200x200 mm, 300x200 mm, 400x200 mm, 400x400 mm |
| Type | Wall Mount |
Adjusts the projector's position forward or backward on the mount arm.
Covers the process of attaching wall plate covers and the decorative cover for a finished look.
Provides guidelines for checking mount security and contacting support for assistance.
Details critical safety precautions for installation and use, including weight limits and mounting advice.
Lists all components included in the hardware package for verification before installation.
Guides on routing projector cables through the mounting bracket for a neat installation.
Verifies projector placement and distances relative to the screen for optimal projection.
Step-by-step instructions for securely attaching the mount to wooden studs.
Instructions for attaching the mount to concrete or brick surfaces using specific hardware.
Attaches the main mounting bracket to the wall plate using screws and an allen key.
Secures the projector to the installed wall mount assembly, potentially using extension arms.
Modifies the projector's up/down angle for precise screen alignment.
Corrects the projector's side-to-side tilt for image leveling.
Controls the projector's left/right swivel for centering the image.
Moves the projector horizontally to fine-tune its position on the mount.
