QualGear QG-PRO-PM-SCA-W User Manual

C Anchor
IMPORTANT! Do not loosen screws all the way when making adjustments,
this will disconnect the parts and may cause injury or property damage.
To connect the 1.5" NPT pipe (sold separately) to the ceiling adapter, twist the male threaded end
into the female thread of the adapter. Then secure the position with screws (F or G) using the
allen key (I). Decorative cover (H) can be attached post-installation to make the appearance look tidy.
Alley Key
(I)
Decorative Cover
(H)
OR
(G) x 2
(F) x 2
Ceiling Adapter
1.5" NPT Pipe
(not included)
r.
CAUTION!
Do not exceed the maximum rated weight
specified. Otherwise, serious injury or
property damage may occur.
45.5kg
(100lbs)
RATED
Version November 2015
5 Year Limited Warranty
Version November 2015
5 Year Limited Warranty
QG-PRO-PM-SCA-W
Attaching the 1.5" NPT Pipe to the Suspended Ceiling Adapter
4

QualGear QG-PRO-PM-SCA-W Specifications

General

Brand	QualGear
Model	QG-PRO-PM-SCA-W
Category	Racks & Stands
Language	English