ABOUT THE SYSTEM SYSTEM FRONT VIEW
1-11
Figure 1-4. Hybrid 3.5” + 2.5” Storage Drive System Front View
Front Control Panel (FCP)
For purposes of this procedure, the FCP is used for the numbering indicators.
Figure 1-5. Front Control Panel
Table 7: Front Panel View
NO.NAME DESCRIPTION
1 Thumb screw Secure the system to rack frame
2 3.5” HDD tray 4 x 3.5” SATA/SAS drive
3 USB port Connect to USB device
4 2.5” HDD tray (9mm)
4x 2.5” SATA/SAS/NVMe drive (optional)
4x 2.5” SATA/SAS drive (optional)
5 Front control panel See Front Control Panel LEDs on page 1-21 for further information.
Table 8: Front Control Panel Definition
NO.ICON NAME DESCRIPTION
1
Power button with
LED
Power on / off
Blue on - S0 system power on; Off - S5 system power off
2 Reset button Soft reset system function
3
Identification button
with LED
Toggles ID LED, activate ID LED to identify system
Blue blinking - Identifier on front and rear chassis; Off - Normal.
4System Status LED
Provides critical and non-critical failure notification
Amber blinking - failed; Off - SEL cleared / good
To Next Page
Loading...