ABOUT THE SYSTEM SYSTEM REAR VIEW
1-13
Power Sub-System
Figure 1-8. PSU to Mainboard Module Description
A single power supply unit (default) is supplied in the system. A secondary PSU is available
for redundacy functionality.
Table 10: System Rear I/O Defintition
NO.ICON NAME DESCRIPTION
1 Dedicated NIC Dedicated RJ45 connector
2VGA connector
Maximum display resolution: 1920x1200 32bpp@60Hz
(reduced blanking)
3 COM A port DB9 port (Serial_A) for debug or terminal concentrator
4
USB 3.0 port
USB 1 port; connect to USB device
5 USB 0 port; connect to USB device
6 Identification LED Blue blinking - Identifier; Off - Normal.
7 MicroSD slot Backup BMC SEL.
Table 11: AC Power Supply Units by Model
PSU AC INPUT
2 x 500W and 800W Titanium/Platinum
high efficiency redundant PSU
100-240VAC 50/60Hz, AC/HVDC support
Table 12: DC Power Supply Units by Model
PSU DC INPUT
2 x 1100W high efficiency redundant DC PSU DC -39 - -72V, 37A max.
To Next Page
Loading...