ABOUT THE SYSTEM ENABLING PLATFORM TRUSTED TECHNOLOGY (PTT)
1-24
Enabling Platform Trusted Technology (PTT)
To enable platform trusted technology feature, you might need to select “Server ME Con-
figuration” in “Platform Configuration” screen from BIOS Main screen by pressing the right
arrow until the Platform Configuration screen is chosen. Press the down arrow key until
“Server ME Configuration” is selected.
Press down arrow key to select PTT Support. Then you can enable/disable the PTT feature
for your system
TPM configuration settings
To setup the TPM configuration, you might need to select “Trusted Computing” in
“Advanced” screen from BIOS Main screen by pressing the right arrow until the Advanced
screen is chosen. Press the down arrow key until “Trusted Computing” is selected.
Table 22: Storage Drive LED Status Behavior
NAME COLOR CONDITION DESCRIPTION
Drive Status / Fault
Blue
Blinking
Twice per second: Identification
Once per second: Rebuilding
On Drive is online
Amber HDD failure
Off Slot is empty
To Next Page
Loading...