ABOUT THE SYSTEM SPANNING RAID DATA VOLUMES ACROSS VMD DOMAINS
1-18
Spanning RAID data volumes across VMD domains
To enable the spanning RAID data volumes across VMD domains feature, you might need
to select “Enable RAID spanned over VMD Controllers ” in “Intel(R) Virtual RAID on CPU”
(VROC) under the “Advanced” screen from BIOS Main screen by pressing the right arrow
until the Advanced screen is chosen.
Press the right arrow key until “Advanced” is selected and press the down arrow key until
“Intel(R) Virtual RAID on CPU” is selected.
1. Press F2 or Del to enter into the BIOS configuration the setup menu and press right
arrow key to access the “Advanced” page.
2. Navigate to and select “Intel(R) Virtual RAID on CPU”.
Table 17: Intel® VMD on Socket X Screen Description
SETUP ITEM OPTIONS HELP TEXT COMMENTS
VMD Config for PStack0 Information only.
Intel® VMD for Volume
Management Device for
PStack0
[Disable]
[Enable]
Enable/Disable Intel® Volume Manage-
ment Device Technology in this Stack.
VMD Config for PStack1
Intel® VMD for Volume
Management Device for
PStack1
[Disable]
[Enable]
Enable/Disable Intel® Volume Manage-
ment Device Technology in this Stack.
VMD Config for PStack2
Intel® VMD for Volume
Management Device for
PStack2
[Disable]
[Enable]
Enable/Disable Intel® Volume Manage-
ment Device Technology in this Stack.
To Next Page
Loading...