ABOUT THE SYSTEM LED STATUS DEFINITIONS
1-22
BMC Management Port LEDs
The system mainboard includes one dedicated RJ45 GbE management port. The RJ45 con-
nector has two built-in LEDs. See the following illustration and table for details.
Figure 1-13. GbE RJ45 Management Port
Storage Drive LED
Front 2.5” Storage Drive LED Status Behavior
Figure 1-14. 2.5” Storage Drive LED Identification
The following LED behavior table represents LED conditions.
Status LED Amber
Blinking
Critical Failure: critical fan, voltage, temperature state.
Non-Critical Failure: non-critical fan, voltage, temperature
state, CPU thermal trip, DC off.
Off
SEL cleared
Last pending warning or error has been de-asserted.
Table 19: RJ45 LED Description
CONDITION LINK ACTIVITY
Unplugged Off Off
1G active link On amber Blinking green
100M active link On green Blinking green
10M active link Off Blinking green
Table 18: Front Control Panel LEDs Behavior (Continued)
NAME COLOR CONDITION DESCRIPTION
Link
Activity
PIN 1
Location
Status / Fault LED
Active LED