QUANTA STRATOS S210 Series S210-X12RS User Manual

ABOUT THE SERVER INTRODUCTION
1-1
1.1 Introduction
This manual is written for system technicians who are responsible for troubleshooting, upgrading, and repairing the server chassis.
This document provides an overview of the hardware features of the chassis, troubleshooting information, and instructions on how to
add and replace components of the multi-node server series.The document also provides information on the BIOS, and Baseboard
Management Controller (BMC).
For the latest version of this manual, see www.QauntaQCT.com.
System Features
The system comprises a 1U/28.66” long chassis using 16.5” x
19.18” mainboard. The major components are featured as fol-
lows:
 Chipset: Intel
®
C602 series, upgradeable ROM kit sup-
port.
 Processors (x2): Intel
®
Xeon processor E5-2600 / E5-
2600 v2 product family.
 PCI Express: (1) PCIe x16 G3 Low profile riser slot, (1)
PCIe x8 G3 Network Mezzanine slot, (1) PCIe x8 G3 SAS/
RAID Mezzanine slot.
 Memory: Up to twenty-four DIMM slots are available.
DDR3 800/1066/1333/1600/1866 MHz RDIMM/LR-DIMM
memory is supported.
 Storage: Up to ten 2.5" SATA/SAS hot-plug drives or four
3.5" SATA/SAS hot-plug drives. One SATADOM is
optional.
 Network: Intel
®
Powerville I350GbE RJ45 or Intel
®
Twin-
ville X540 10G BASE T RJ45 dual-port on board.
Note:
A second processor must be installed (in
processor slot 2) to activate the expansion slot and
to allow the mezzanine card in there to function
properly.
Note:
Expansion cards descriebed in the document are
optional components.
Table 1-1: Specification
Chassis type 1U Chassis

QUANTA STRATOS S210 Series S210-X12RS Specifications

General

Brand	QUANTA
Model	STRATOS S210 Series S210-X12RS
Category	Server
Language	English