SAFETY INFORMATION SERVER SAFETY INFORMATION
3-1
3.1 Server Safety Information
To reduce the risk of bodily injury, electrical shock, fire, and
equipment damage, read this document and observe all warn-
ings and precautions in this guide before installing or maintain-
ing your server product.
In the event of a conflict between the information in this docu-
ment and information provided with the product or on the web-
site for a particular product, the product documentation takes
precedence.
Your server should be integrated and serviced only by techni-
cally qualified persons.
You must adhere to the guidelines in this guide and the assem-
bly instructions in your server manuals to ensure and maintain
compliance with existing product certifications and approvals.
Use only the described, regulated components specified in this
guide. Use of other products / components will void the UL List-
ing and other regulatory approvals of the product, and may
result in noncompliance with product regulations in the
region(s) in which the product is sold.
Safety Warnings and Cautions
To avoid personal injury or property damage, before you begin
installing the product, read, observe, and adhere to all of the fol-
lowing safety instructions and information. The following safety
symbols may be used throughout the documentation and may
be marked on the product and / or the product packaging.
Table 9-1: Safety Warning and Cautions
CAUTION
Indicates the presence of a hazard that may cause
minor personal injury or property damage if the
CAUTION is ignored.
WARNING
Indicates the presence of a hazard that may result in
serious personal injury if the WARNING is ignored.
Indicates potential hazard if indicated information is
ignored.
Indicates shock hazards that result in serious injury or
death if safety instructions are not followed.
Indicates hot components or surfaces.
Indicates do not touch fan blades, may result in injury.
To Next Page
Loading...
Need help?
General
