SAFETY INFORMATION OTHER HAZARDS
3-7
Other Hazards
Battery Replacement
Cooling and Airflow
Laser Peripherals or Devices
Use certified and rated Laser Class I for Optical Transceiver
product.
CAUTION!
THERE IS THE DANGER OF EXPLOSION IF THE BATTERY IS
INCORRECTLY REPLACED. WHEN REPLACING THE BATTERY, USE
ONLY THE BATTERY RECOMMENDED BY THE EQUIPMENT
MANUFACTURER.
CAUTION!
DISPOSE OF BATTERIES ACCORDING TO LOCAL ORDINANCES AND
REGULATIONS.
CAUTION!
DO NOT ATTEMPT TO RECHARGE A BATTERY.
CAUTION!
DO NOT ATTEMPT TO DISASSEMBLE, PUNCTURE, OR OTHERWISE
DAMAGE A BATTERY.
!
!
!
!
CAUTION!
CAREFULLY ROUTE CABLES AS DIRECTED TO MINIMIZE AIRFLOW
BLOCKAGE AND COOLING PROBLEMS. FOR PROPER COOLING AND
AIRFLOW, OPERATE THE SYSTEM ONLY WITH THE CHASSIS
COVERS INSTALLED. OPERATING THE SYSTEM WITHOUT THE
COVERS IN PLACE CAN DAMAGE SYSTEM PARTS. TO INSTALL THE
COVERS:
Check first to make sure you have not left loose tools or
parts inside the system.
Check that cables, add-in cards, and other components
are properly installed.
Attach the covers to the chassis according to the product
instructions.
CAUTION!
TO AVOID RISK OF RADIATION EXPOSURE AND / OR PERSONAL
INJURY:
Do not open the enclosure of any laser peripheral or
device.
Laser peripherals or devices are not serviceable.
Return to manufacturer for servicing.
!
!
To Next Page
Loading...
Need help?
General
