Troubleshooting |
Contents | 85
|
Ultra
Version M 22-April-2012
|
Ultra
Interlock
Value
ICE Front Panel
Message
Possible Cause Solution/Suggestion Description
IQS 10000000
Q-S disabled This interlock does
not prevent the laser
from firing. It prevents
Q-Switch activation
before the safety
timeout expires.
Contact Quantel Customer Service for
repair.
This interlock is not used. If this value
appears, contact Quantel Customer
Service for repair.
IQS 01000000
Q-S disabled
coolant temperature
under limit
This interlock does
not prevent the laser
from firing. It prevents
Q-Switch activation
when the coolant is
below the minimum
operating temperature.
Allow the coolant to warm up.
Contact Quantel Customer Service to
inquire about increasing the minimum
Q-Switch operating temperature.
To protect optics and ensure reliable laser
performance, the coolant temperature must
meet a required minimum or Q-Switch
operation is locked out. This interlock
monitors the coolant temperature using a
sensor located in the coolant reservoir.
IQS 00001000
I
QS 00000100
IQS 00000010
IQS 00000001
Q-S disabled iQS_4
Q-S disabled iQS_3
Q-S disabled iQS_2
Q-S disabled iQS_1
Contact Quantel Customer Service. These interlocks are not used. If they occur,
they indicate a problem.
To Next Page
Loading...
Need help?
General
