What to do if my Quantum Audio Receiver does not power on?
If your Quantum Audio Receiver doesn't power on, there are a couple of things you can check. First, see if the power fuse is open and replace it with one of the same value. If the fuse is fine, there may have been an MCU error. In that case, try pressing the RESET button on the front panel.
Why is my Quantum Audio QA50BT Receiver remote control not responding?
If your Quantum Audio Receiver's remote control isn't responding, the first thing to check is the battery. If the remote battery is low on power, replace it.
How to fix poor radio station reception on Quantum Audio QA50BT?
If you're experiencing poor radio station reception on your Quantum Audio Receiver, the issue might be with the antenna. Check the antenna connection to ensure it is not loose and is properly grounded. Make sure the antenna is connected.
What to do if there is no video image on Quantum Audio QA50BT Receiver?
If there is no video image on your Quantum Audio Receiver, the video signal might be disconnected. Check all video cables to ensure they are properly connected.
What to do if my Quantum Audio QA50BT cannot play a disk?
If your Quantum Audio Receiver cannot play a disk, there are several possible reasons. * The disk may be scratched, so try a new one. * Ensure that the disk is inserted correctly, with the label side up. * The disk might be dirty, so try cleaning it.
Why does my Quantum Audio QA50BT lose radio station preset memory?
If your Quantum Audio Receiver is losing radio station preset memory, it could be due to a wrong connection between the ignition line ACC and 12V. Reconnect the line to resolve this issue.
General| Bluetooth | Yes |
|---|---|
| USB Port | Yes |
| AUX Input | Yes |
| Radio Tuner | AM/FM |
| Display | LCD |
| Power Output | 50W x 4 |
Detailed description of each wire and its function in the wiring harness.
Options for customizing audio sound profiles and presets.
Controls for bass, treble, volume, and loudness.
To Next Page