Initial Configuration
Quantum DXi4700 Installation Guide 72
Figure 58: DXi4700 G2 Optional 10 GbE Ethernet Cabling
Figure 59: DXi4700 Optional 10 GBase-T Ethernet Cabling
Installing the Front Bezel
New DXi Bezel
A new DXi bezel is available. Please contact your account sales manager to purchase additional new
bezels.
Install the protective bezel on the front of the DXi4700Node. The bezel snaps into place on the front of the
Node to prevent the removal of the system from the rack (see Figure 60 on the next page).
1. If you have not already done so, remove the bezel key secured with tape inside the bezel.
2. Insert the right side of the bezel into the slots on the right side of the Node or Expansion module (You
To Next Page
Loading...
