DAE/Veeam Memory Module Installation
Quantum DXi4700 Installation Guide 78
l To enable data replication to another DXi™-Series system, refer to Chapter 6, “DXi4700 Replication” in
the QuantumDXi4700 User’s Guide).
Installing Additional DAE/Veeam Memory Modules
For DXi4700 systems that will run a DAE or Veeam configuration, the installation of additional memory
modules is required (see DAE/Veeam Memory Module Installation below).
DAE/Veeam Memory Module Installation
For DXi4700 systems with a DAE or Veeam configuration, the installation of additional memory modules is
required. Memory modules must be installed in the correct sockets in order for the system to function
properly.
WARNING: DO NOT install the additional memory modules to support a DAE or Veeam configuration
until the DXi4700 system installation is complete.
Shutting Down the System
To shut down the system:
1. In the remote management console, navigate to the Utilities > Reboot & Shutdown page (see
Figure 64 below).
Figure 64: Reboot & Shutdown Page
2. Select Shutdown and click Apply.
To Next Page
Loading...
