Chapter 7: Status
Hardware
Quantum DXi4700 User’s Guide 166
Status The status of the component.
Normal - (Green) The component is operating correctly.
Attention - (Yellow) There is a problem with the component.
Failed - (Red) The component has failed.
Host Bus Adapters
The Host Bus Adapters page allows you to view information about installed Fibre Channel or SAS cards
and their ports.
Note: The Host Bus Adapters page displays only on DXi4700 configurations that include a Fibre
Channel card.
To access the Host Bus Adapters page, on the Details page, click the Host Bus Adapters tab (see
Figure 107 below).
Figure 107: Host Bus Adapters Page
The Host Bus Adapters section displays the following information about each Fibre Channel or SAS card:
Component The name of the Fibre Channel card.
Click the name of the card to view detailed information for the card below.
Status The status of the Fibre Channel card.
l Normal - (Green) The component is operating correctly.
l Attention - (Yellow) There is a problem with the component.
l Failed - (Red) The component has failed.
The Fibre Channel Controller section displays the following information about the ports in the selected
Fibre Channel controller:
To Next Page
Loading...
