Quantum DXi4700

Chapter 9: Configuration
VTL Configuration
Quantum DXi4700 User’s Guide 207
To access the Partitions page, on the VTL page, click the Partitions tab.
The Partitions page contains the following tabs:
Partitions Summary
The Partitions Summary page allows you to view information about existing partitions. You can also add
or edit partitions, and delete partitions.
To access the Partitions Summary page, on the Partitions page, click the Summary tab (see Figure 135
below).
Figure 135: Partitions Summary Page
Tasks
Use the Partitions Summary page to perform the following tasks:
l View information about existing VTL partitions (see Partition List below).
l Add a new VTL partition to the system (see Adding a VTL Partition on page 209).
l Edit properties for an existing VTL partition (see Partitions on the previous page).
l Delete a VTL partition from the system (see Partitions on the previous page).
l Change the mode of a partition (see Changing Partition Mode on page 215).
Partition List
The Partition List section displays the following information for all VTL partitions on the DXi4700:
Available Partitions The number of partitions that have been added to the system and the maximum
number of partitions that can be added.